Journal article

A comparative study of enzymatic and Fenton pretreatment applied to a birch kraft pulp used for MFC production in a pilot scale high-pressure homogenizer


Information saknas

Research Areas

Information saknas

Publication Details

Författarlista: Paulsson, Magnus

Publikationsår: 2016

Startsida: 375

End page: 381

Antal sidor: 7

ISSN: 0734-1415

Visa ytterligare informaiton: View in Web of Science


Microfibrillated cellulose (MFC) was produced in pilot scale from a bleached birch (Betula verrucosa) kraft pulp that was pretreated with either Fentons reagent or with a combined mechanical and enzymatic method used at the Centre Technique du Papier (CTP; Grenoble, France). The change in fiber fibrillation during the homogenization treatment was monitored by analyzing the fiber and the fines content, size fractionation, rheological properties and visualization by light-and scanning electron microscopy (SEM). The Fenton pretreatment resulted in MFC suspensions that contained a high amount of small sized elements. After five passes through the high-pressure homogenizer, the amount of particles smaller than 20 mu m was 37% for the Fenton pretreated MFC compared to 13% for the enzymatically (endoglucanase) pretreated MFC. Altogether, the Fenton pretreatment enabled preparation of MFC with a higher degree of fibrillation after the same number of passes through the high-pressure homogenizer. Another option is to produce MFC of the same amount of fibrillation as after an enzymatic stage, but at significantly lower energy consumption.


Information saknas


Information saknas


Information saknas